Features:

• Full, cycle accurate emulation of two real Commodore 1541 diskdrives.
  • Uses .D64 and .G64 files stored on MicroSD card or USB stick
  • Supports .G64 files as well (Read/Write)
  • Configurable IDs
  • Configurable ROM (1541/1541C/1541II or custom)
  • RAMBOard memory expansion (up to 40K)
• MicroSD or USB storage device (stick, card reader, and even HD)
  
• FAT/FAT32 support, with sub-directories and long filenames
• ISO9660 support with Joliet, for reading .ISO files and access external CD/DVD drives through USB
• Supports SD V1.1 cards as well as SD V2.0 in High Capacity mode (SDHC)
• Battery backed up Real Time Clock
• Dual SID implementation, optionally 8 voices each
• Built-in SID player; plays SID files on either 'real' SID or emulated SID.
• C64 cartridge emulation:
• • Final Cartridge III
  • Action Replay
  • Retro Replay
  • Super Snapshot
  • Turbo Assembler w/ Codenet
  • Epyx Fastloader
  • Custom 8K/16K carts
  • Custom Ocean / System3 carts (up to 512K)
• Commodore 1750/1764 REU
  • REU Compatible
  • Size selectable from 128K up to 16 MB
  • Can be combined with Retro Replay and SuperSnapshot compatible roms
• Flexible freezer menu
  • select, mount, create D64 images, browse disk images
  • create new directories, delete files
  • Ultra fast DMA load of single file programs (.PRG files on SD/USB, inside .D64 or .T64)
• Configuration screen, with resident settings
• Tape emulation, through 6-pin header on the bottom of the board*
  • Load .TAP files to C64
  • Capture tape data from C64 to .TAP file
  • Capture tape data from a datasette and store it as .TAP file
• Totally rewritten firmware, for easier expansion and maintenance
  

* Tape emulator cable is an accessory, which is needed to work with tap files.

Specifications:

- Board size: 62 x  84 mm

- Sturdy plastic case, enforced with glass fiber

- 700k-gate FPGA

- Full size 6-pin DIN connector (IEC)

- 2 MB Flash ROM

- 32 MB SDRAM

- MicroSD card compatible slot

- USB host port (supports Mass storage class only)

- Stereo audio output

- 6-pin expansion pin-header for connection to tape port (for C2N emulation), or other future features.